Show Me - Tell Me

Combination

Question No.

Show / Tell

Question

Show me how you would check that the direction indicators are working.

Answer

Applying the indicators or hazard warning switch and check functioning of all indicators. (may need to switch ignition on, prompt not to start engine)

Combination

Question No.

Show / Tell

Question

Tell me how you would check that the brakes are working before starting a journey.

Answer

Brakes should not feel spongy or slack. Brakes

should be tested as you set off. Vehicle should not pull to one side.

Combination

Question No.

Show / Tell

Question

Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.

Answer

Identify reservoir and explain how to check level.

Combination

Question No.

Show / Tell

Question

Show me how you would check that the brake

lights are working on this car. (I can assist you, if you need to switch the ignition on, please don't start the engine)

Answer

Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help. (may need to switch ignition on, prompt not to start engine)

Combination

Question No.

Show / Tell

Question

Show me / explain how you would check that the power assisted steering is working before starting a journey.

Answer

If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

Combination

Question No.

Show / Tell

Question

Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.

Answer

Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.

Combination

Question No.

Show / Tell

Question

Show me how you would check the parking brake (handbrake) for excessive wear, make sure you keep safe control of the vehicle

Answer

Apply footbrake firmly. Demonstrate by applying

parking brake (handbrake) so that when it is fully applied it secures itself, and is not at the end of the working travel.

Combination

Question No.

Show / Tell

Question

Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.

Answer

Identify reservoir and explain how to check level.

Combination

Question No.

Show / Tell

Question

Open the bonnet, identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.

Answer

Identify dipstick / oil level indicator, describe check of oil level against the minimum/maximum markers.

Combination

Question No.

Show / Tell

Question

Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.

Answer

Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.

Combination

Question No.

Show / Tell

Question

Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.

Answer

Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.

Combination

Question No.

Show / Tell

Question

Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash

Answer

The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. N.B. Some restraints might not be adjustable

Combination

Question No.

Show / Tell

Question

Open the bonnet, identify where the brake fluid

reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.

Answer

Combination

Question No.

Show / Tell

Question

Tell me how you would check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.

Answer

No cuts and bulges, 1.6mm of tread depth across the central ¾ of the breadth of the tyre and around the entire outer circumference.

Combination

Question No.

Show / Tell

Question

Show me how you would check that the horn is

working (off road only).

Answer

Check is carried out by using control (turn on

ignition if necessary).

Combination

Question No.

Show / Tell

Question

Tell me how you would check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.

Answer

No cuts and bulges, 1.6mm of tread depth across the central ¾ of the breadth of the tyre and around the entire outer circumference.

Combination

Question No.

Show / Tell

Question

Tell me how you would check that the brakes are working before starting a journey.

Answer

Brakes should not feel spongy or slack. Brakes

should be tested as you set off. Vehicle should not pull to one side.

Combination

Question No.

Show / Tell

Question

Show me how you would clean the windscreen

using the windscreen washer and wipers

Answer

Operate control to wash and wipe windscreen (turn ignition on if necessary).

Combination

Question No.

Show / Tell

Question

Tell me how you would check that the headlights & tail lights are working. (No need to exit vehicle)

Answer

Combination

Question No.

Show / Tell

Question

Show me how you would set the demister controls to clear all the windows effectively, this should include both front and rear screens

Answer

Set all relevant controls including; fan, temperature, air direction / source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstration

Combination

Question No.

Show / Tell

Question

Show me how you would switch on the rear fog

light(s) and explain when you would use it/them. (No need to exit vehicle)

Answer

Operate switch (turn on dipped headlights and

ignition if necessary). Check warning light is on. Explain use.

Combination

Question No.

Show / Tell

Question

Tell me how you would know if there was a problem with your anti lock braking system

Answer

Warning light should illuminate if there is a fault

with the anti lock braking system

Combination

Question No.

Show / Tell

Question

Show me how you would check that the brake

lights are working on this car. (I can assist you, if you need to switch the ignition on, please don't start the engine)

Answer

Operate brake pedal, make use of reflections in

windows, garage doors, etc, or ask someone to help. (may need to switch ignition on, prompt not to start engine)

Combination

Question No.

Show / Tell

Question

Tell me how you would check that the headlights & tail lights are working. (No need to exit vehicle)

Answer

Combination

Question No.

Show / Tell

Question

Show me how you switch your headlight from

dipped to main beam and explain how you would know the main beam is on whilst inside the car

Answer

Combination

Question No.

Show / Tell

Question

Tell me how you would know if there was a

problem with your anti lock braking system

Answer

Warning light should illuminate if there is a fault

with the anti lock braking system

Powered by NUR Tijarah